ALGs Supported in OmniAccess 5740 USG
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
791
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
FIREWALL ALG DEBUG COMMANDS
TO VIEW DNS DEBUG COUNTERS
EXAMPLE
ALU(config)# show firewall alg dns debug-counters
Total malloc operations : 0
Total failed malloc operations : 0
Total memory release operations : 0
T
O VIEW FTP ALG DEBUG COUNTERS
EXAMPLE
ALU(config)# show firewall alg ftp debug-counters
Total malloc operations : 0
Total failed malloc operations : 0
Total memory release operations : 0
T
O VIEW TFTP ALG DEBUG COUNTERS
EXAMPLE
ALU(config)# show firewall alg tftp debug-counters
Total malloc operations : 0
Total failed malloc operations : 0
Total memory release operations : 0
Command (in SUM/CM) Description
show firewall alg dns debug-
counters
This command is used to view the
DNS ALG debug counters.
Command (in SUM/CM) Description
show firewall alg ftp debug-counters This command is used to view
the FTP ALG debug counters.
Command (in SUM/CM) Description
show firewall alg tftp debug-counters This command is used to
view the TFTP ALG debug
counters.
To Next Page
Loading...
Need help?
General
