Alcatel-Lucent OmniAccess 5740 - Page 824

Filter and Firewall
Left running head:
Chapter name (automatic)
798
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
Match-list configuration:
ALU(config)# match-list m1
ALU(config-match-list-m1)# tcp any host 203.100.100.2/28
service 100
ALU(config-match-list-m1)# match-list m2
ALU(config-match-list-m2)# tcp any host 203.100.100.2/28
service 99
ALU(config-match-list-m1)# match-list m3
ALU(config-match-list-m3)# tcp any host 203.100.100.2/28
service 98
ALU(config-match-list-m1)# match-list m4
ALU(config-match-list-m4)# tcp any host 203.100.100.2/28
service 21
DNAT Configuration
ALU(config-match-list-m3)#ip nat dnat
ALU(config-nat-dnat)# match m1 destination-nat host 10.1.1.1
ALU(config-nat-dnat)# match m2 destination-nat host 10.1.1.2
ALU(config-nat-dnat)# match m3 destination-nat host 10.1.1.3
ALU(config-nat-dnat)# match m4 destination-nat host 10.1.1.4
Customized-Service Configuration
ALU(config)customized-service
ALU(config-customized-service)#match m1 service ftp
ALU(config-customized-service)#match m2 service ftp
ALU(config-customized-service)#match m3 service ftp
ALU(config-customized-service)#match m4 service none
Show Customized-Service Configuration
ALU(config)# show customized service
10 match m1 service ftp
20 match m2 service ftp
30 match m3 service ftp
40 match m4 service none