IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
832
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O CONFIGURE AN IKE PROPOSAL
Note: If no proposal is configured for an IKE policy, md5-des is taken as the default
proposal.
E
XAMPLE
ALU(config-crypto-ike-policy-P1)# proposal md5-aes-128
ALU(config-crypto-ike-policy-P1)# no proposal
Command (in IKE Policy CM) Description
proposal {<algo>[<algo>][<algo>]
[<algo>]...}
Note: Options for algo are:
md5-aes128 | md5-aes192 | md5-
aes256 | md5-des | md5-3des |
sha1-aes128 | sha1-aes192 |
sha1-aes256 | sha1-des | sha1-
3des
Use this command to configure an
IKE proposal.
You can configure a maximum
of 4 proposals.
no proposal This command deletes the
proposal configured for the IKE
policy.
The ‘no’ command resets the IKE
policy to its default.
To Next Page
Loading...
