AAA Configuration on OmniAccess 5740 USG
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
61
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
RADIUS SERVER GROUP CONFIGURATION
A RADIUS server group is a list of radius servers, which can be used as an
authentication method in a method-list. The servers are approached in the order
they are specified for authentication information.
T
O CONFIGURE A RADIUS SERVER GROUP
EXAMPLE
ALU(config)# aaa server-group radius rad1
ALU(config-srv-grp-rad1)#
The following error is displayed if you try to configure a RADIUS server group with
the name ‘local’:
ALU(config)# aaa server-group radius local
The name of the Group is reserved
ALU(config)# no aaa server-group radius rad1
Command (in CM) Description
aaa server-group radius
<name>
This command is used to configure a
RADIUS server group.
Note: You cannot enter a RADIUS
server group as ‘local’ as it is a
reserved keyword for a pre-
defined authentication method.
This command enters the RADIUS Server-
Group mode.
no aaa server-group radius
<name>
This command deletes the specified RADIUS
server group.
You cannot delete a RADIUS server group if
it is associated to any method list.
To Next Page
Loading...
