Alcatel-Lucent OmniAccess 5740 Cli Configuration Guide

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
64
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
E
XAMPLE
ALU(config)# radius-server auth-port 1800
ALU(config)# radius-server deadtime 10
ALU(config)# radius-server key test
ALU(config)# radius-server retransmit 5
ALU(config)# radius-server timeout 10
[no] radius-server
retransmit <1-100>
This command is used to specify a global
retransmit value that will be applied to all the
RADIUS Groups (provided there is no server
specific retransmit value configured).
The default retransmit value is 3.
The ‘no’ command deletes the global
RADIUS retransmit value from the
configuration, and resets it to default (for all
servers that do not have a server specific
retransmit value).
[no] radius-server timeout
<1-1000>
This command is used to specify a global
timeout value that will be applied to all the
RADIUS Groups (provided there is no server
specific timeout value configured).
The default timeout value is 5 seconds.
The ‘no’ command deletes the global
RADIUS timeout value from the
configuration, and resets it to default (for all
servers that do not have a server specific
timeout value).
Command (in CM) Description

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English