IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
910
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O CONFIGURE PRIMARY AND SECONDARY DNS IP ADDRESS
EXAMPLE
ALU(config-client-obj-myclientobject)# primary_dns_ip 1.1.1.1
secondary_dns_ip 1.1.1.2
ALU(config-client-obj-myclientobject)# no primary_dns_ip
1.1.1.1
ALU(config-client-obj-myclientobject)# no secondary_dns_ip
1.1.1.2
Command (in Client Object CM) Description
primary_dns_ip <ip-address>
secondary_dns_ip <ip-address>
This command is used to configure
the IP address of the primary and
secondary DNS in a crypto client
object.
This is the primary and secondary
DNS to be sent to IPSec client.
no primary_dns_ip <ip-address> This command is used to remove
the IP address of the primary DNS
in a crypto client object.
no secondary_dns_ip <ip-address> This command is used to remove
the IP address of the secondary
DNS in a crypto client object.
To Next Page
Loading...
Need help?
General
