Alcatel-Lucent OmniAccess 5740 - Page 939

IPsec VPN Server Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
913
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO CONFIGURE CLIENT FIREWALL
EXAMPLE
ALU(config-client-obj-myclientobject)# client firewall pass
T
O ENABLE/DISABLE SAVE PASSWORD
EXAMPLE
ALU(config-client-obj-myclientobject)# save-password yes
Command (in Client Object CM) Description
client firewall
{Disable|Drop|No-Firewall
|Pass|PassLocal}
This command is used to configure
client firewall option.
When client is not connected to
gateway, it will only allow client
initiated traffic, rest will be dropped.
Pass will pass all the traffic. Drop
option will drop all the traffic if no
tunnel is formed.
By default, client firewall is
disabled.
Command (in Client Object CM) Description
save-password {No|Yes} This command is used to enable or
disable the client to save password.
Yes: This option allows the client to
save password. When this option is
configured, the “Save password”
field on the client is enabled and
client can save the password, and
does not have to enter the password
for every login.
No: This option does not allow the
client to save password. When this
option is configured, the “Save
password” field on the client will be
grayed out and client has to enter
the password every time.
By default, save password is set
to No.