Alcatel-Lucent OmniAccess 5740 - Page 952

Intrusion Detection/Intrusion Prevention System
Left running head:
Chapter name (automatic)
926
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O ROLLBACK SNORT RULE DATABASE
EXAMPLE
ALU(config-firewall-intrusion-snort)#rollback 2.3.1
T
O MANUALLY REBUILD SIGNATURE DATABASE
EXAMPLE
ALU(config-firewall-intrusion-snort)# rebuild 2.3.0
T
O MODIFY GROUP LEVEL DETECTION
EXAMPLE
ALU(config-farewell-intrusion-snort)# rule detection category
attack-responses
T
O MODIFY GROUP LEVEL PREVENTION
EXAMPLE
ALU(config-firewall-intrusion-snort)# rule prevention category
attack-responses
Command (in Intrusion Snort CM) Description
rollback <version-number> Use this command to rollback to different
versions of the Snort rule database.
Command (in Intrusion Snort CM) Description
rebuild <version-number> Use this command to manually rebuild
the signature database.
Command (in Intrusion Snort CM) Description
rule detection {{category
<name>..|classtype <name>..|
priority {high|low|medium}}
This command enables you to modify the
group level detection.
Command (in Intrusion Snort CM) Description
rule prevention {{{category
<name>|classtype <name>|
priority {high|low|medium}|
reset {category <name>
|classtype <name>|priority
{high|low|medium}}}
This command enables you to modify the
group level prevention.