IDS/IPS Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
929
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO ATTACH A FIREWALL POLICY TO AN INTERFACE
Note: The Firewall policy will take effect once it is attached to an interface.
E
XAMPLE
ALU(config)# interface GigabitEthernet3/0
ALU(config-if GigabitEthernet3/0)# firewall policy in P1
Command (in ICM) Description
firewall policy {in|out}
<policy-name>
This command is used to attach a
firewall policy (to which an intrusion
sensor is attached) to an interface in ‘in’
or ‘out’ direction.
Firewall policy is applied to the ingress
(incoming) traffic if the “in” keyword is
used.
Firewall policy is applied to the egress
(outgoing) traffic if the “out” keyword is
used.
To Next Page
Loading...
Need help?
General
