Alcatel-Lucent OmniAccess 5740 - Page 970

Generic Routing Encapsulation
Left running head:
Chapter name (automatic)
944
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
• Configure the tunnel destination on the tunnel interface. See “To Configure
Destination IP Address for the Tunnel”
Step 5: Configure optional parameters.
• Set the tunnel DF-BIT. See “To Set the Tunnel DF-BIT”
• To resolve tunnel source and destination. See “To Resolve Tunnel Source
and Destination from a Different VRF”
• Configure GRE keep alive interval. See “To Configure GRE Keep-alive
Interval”
• Configure GRE keep alive maximum tries. See “To Configure GRE Keep-
alive Maximum Tries”