Anritsu MS2026C - Page 168

[:SENSe]:CORRection:COLLect Subsystem VNA Commands
3-126 PN: 10580-00306 Rev. E MS20xxC PM
KMALe TOSLK50A or
TOSLK50A-20
K-Conn(M)
Cal Kit: TOSLK50A-20
Query Response string:
“KMAL(TOSLK50A-20)”
KFEMale OSLKF50 K-Conn(F)
Cal Kit: OSLKF50
If no connector-name is given,
then connector will be set to this.
Query response string: “KFEM”
KFEMale TOSLKF50A or
TOSLKF50A-20
K-Conn(F)
Cal Kit: TOSLKF50A-20
Query Response string:
“KFEM(TOSLKF50A-20)”
716Male 2000-767 7/16(M)
Cal Kit: 2000-767.
If no connector-name is given,
then connector will be set to this.
Query response string: “716M”
716Male 2000-1618 or
2000-1618-R
7/16(M)
Cal Kit: 2000-1618-R
Query Response string:
“716M(2000-1618-R)”
716Female 2000-768 7/16(F)
Cal Kit: 2000-768
If no connector name is given,
then connector will be set to this.
Query response string: “716F”
716Female 2000-1619 or
2000-1619-R
7/16(F)
Cal Kit: 2000-1619-R
Query Response string:
“716F(2000-1619-R)”
TNCMale TNC(M)
Cal Kit: 1091-5x & 1015-55.
If no connector-name is given,
then connector will be set to this.
Query response string: “TNCM”.
TNCFemale TNC(F)
Cal Kit: 1091-5x & 1015-54
If no connector-name is given,
then connector will be set to this.
Query response string: “TNCF”
COAX
<connector> [connector-name] Description