Anritsu MS2026C - Page 348

[:SENSe] Subsystem AM/FM/PM Commands
7-18 PN: 10580-00306 Rev. E MS20xxC PM
[:SENSe]:FREQuency:CENTer <freq>
[:SENSe]:FREQuency:CENTer?
Title: Center Frequency
Description: Sets the center frequency. Note that changing the value of the center
frequency may also change the value of the span.
Parameter: <freq>
Default Unit: Hz
Front Panel
Access: Freq, Center Freq
[:SENSe]:FREQuency:SIGStandard:CHANnel <number>
[:SENSe]:FREQuency:SIGStandard:CHANnel?
Title: Channel Selection
Description: Sets the channel number for the selected signal standard.
Parameter: <number>
Front Panel
Access: Freq, Channel
[:SENSe]:FREQuency:SIGStandard:NAMe <string>
[:SENSe]:FREQuency:SIGStandard:NAMe?
Title: Signal Standard
Description: Selects the desired signal standard from the list. The <string>
argument is the name of the desired signal standard as displayed in the
instrument’s current signal standard list. The list can be seen on the
instrument by choosing the Signal Standard submenu button in the
Freq menu. The list can also be downloaded remotely and viewed using
Anritsu Master Software Tools. For example, if the desired Signal
Standard is:
P-GSM 900 - Uplink then the value of the <string> would be “P-GSM
900 - Uplink”.
The query form of this command will return the name of the
currently-selected Signal Standard on the list.
Parameter: <string>
Front Panel
Access: Freq, Signal Standard