10
Basic safety information
Type 8098FLOWaveL
Generaldangeroussituations
To avoid injury, obey the following instructions:
▶ .
▶ Do not use the device in an environment incompatible with the device materials.
▶ Do not use liquid that is incompatible with the device materials. Find the compatibility chart on our
homepage: country.burkert.com
▶ Do not subject the device to mechanical loads.
▶
▶ Prevent any unintentional power supply switch-on.
▶
▶
▶ Observe the general technical rules.
CAUTION
Riskofinjuryduetoaheavydevice.
A heavy device can fall down during transport or during installation and cause injuries.
▶ Transport, install and dismantle a heavy device with the help of another person.
▶ Use appropriate tools.
NOTICE
Elements and components sensitive to electrostatic discharges
▶ This device contains electronic components that are sensitive to electrostatic discharges. They may be
damaged if they are touched by an electrostatically charged person or object. In the worst case sce-
nario, these components are instantly destroyed or disabled as soon as they are activated.
▶ To minimise or even avoid any damage caused by an electrostatic discharge, take all the precautions
▶ Also make sure that you do not touch any of the live electrical components.
English
To Next Page
Loading...
