Burkert FLOWave L - Message Battery Voltage Is below the Warning Limit; Message Büs Event: Bus Connection Lost; Not Available; Message Overtemperature Detected

326
Maintenance and troubleshooting
Type 8098 FLOWave L
24.9.5 Message "Battery voltage is below the warning limit"
Message Battery voltage is below the warning limit
Symboldisplayedinthe
informationbar
Possiblecause .
-

Whattodo?
→ 
As soon as the battery voltage value returns to within the permitted range,
the warning is automatically reset.
24.9.6 Message "büS event: bus connection lost / not available"
Message büS event: bus connection lost / not available
Symboldisplayedinthe
informationbar
Possiblecause 

Whattodo?
→ Set the Bus mode to Standalone.
24.9.7 Message "Overtemperature detected"
Message
Overtemperature detected
Symboldisplayedinthe
informationbar
Possiblecause The internal temperature of the device is higher than the permitted

supply voltage or the device temperature.
Whattodo?
→ 
As soon as the internal temperature value returns to within the permitted
range, the error is automatically reset.
English