Burkert FLOWave L - Reading out the Characteristics of the Measurement Tube; Reading out the Hardware and Software Versions of the Transmitter Board and of the Measurement Board; Reading out the Serial Numbers of the Device, the Transmitter Board and the Measurement Board

258
SAW sensor – Maintenance
Type 8098 FLOWave L
17.3.2 Reading out the serial numbers of the device, the transmitter
board and the measurement board
To read out the serial numbers of the device, the transmitter board and the measurement board, do the
following:
→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ MAINTENANCE view.
→ Deviceinformation
→ Serialnumbers
→ 
17.3.3 Reading out the hardware and software versions of the
transmitter board and of the measurement board
To read out the hardware and software versions of the transmitter board and of the measurement board, do
the following:
→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ MAINTENANCE view.
→ Deviceinformation
→ Versions
→ 
17.3.4 Reading out the characteristics of the measurement tube
To read out the characteristics of the measurement tube, do the following:
→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ MAINTENANCE view.
→ Deviceinformation
→ Pipecharacteristics
→ 
English