Burkert FLOWave L - Configuring a Digital Output as an Output with Switching Thresholds

294
Outputs – Parameter
Type 8098 FLOWave L
→ On/o
→ Settings The Currentsettings are displayed
→ 
→  and )
→   The Newsettings are displayed.
→ 

18.5.2 Conguring a digital output as an output with switching
thresholds
An output with switching thresholds switches depending on two threshold process values.
The output can switch either according to an hysteresis model or according to a window model.
Hysteresisswitching
The output status changes when a threshold is reached:
• 
• 
ON
OFF
Contact
 
process value
Not inverted
ON
OFF
Contact
 
process value
Inverted


 
Windowswitching:
Contact
 
process value
Not inverted
ON
OFF
Contact
 
process value
Inverted
ON
OFF


 
English