Burkert FLOWave L - Changing the Error Limits, the Warning Limits and the Hysteresis of the Volume Flow Rate

157
SAW sensor – Parameter
Type 8098 FLOWave L
15.4.7 Changing the error limits, the warning limits and the hysteresis
of the volume ow rate

→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ Stand.meas.values Volumeow
→ Limits
→ Settings The Currentsettings are displayed
→  
→  
→  
→  
→   The Newsettings are displayed.
→ 
The limit values and the hysteresis value are changed.
English