216
SAW sensor – Parameter
Type 8098 FLOWave L
15.12 Setting the parameters of the dierentiation factor
(optional feature)
15.12.1 What is the dierentiation factor?
density appeared, the name was changed in order to avoid unnecessary confusion.
The DF is a non-calibrated acoustic measurement based on the measurement of the speed of sound in the
liquid and can be compensated by temperature. The DF gives an idea of the density of most of aqueous
liquids. By default, the temperature compensation is related to water.
→ .
•
•
•
•
15.12.2 Giving a user dened name to the measured dierentiation
factor
Outputs menu).
By default, the name associated to the measured DF is DF.
→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ Add.meas.values
→ DF
→ Valuename .
→
characters.
→ OK
→
The name is changed.
English
To Next Page
Loading...
