Burkert FLOWave L - Display Module Settings; Doing The Quick; Safety Instructions

98
Display module settings
Type 8098 FLOWave L
11 DISPLAY MODULE SETTINGS

11.1 Safety instructions
WARNING
Riskofinjuryduetonon-conformingadjustment.
Non-conforming adjustment could lead to injury and damage the device and its surroundings.
▶ The operators in charge of adjustment must have read and understood the contents of the Operating
Instructions.
▶ In particular, observe the safety recommendations and intended use.
▶ 
11.2 Doing the Quick start adjustments when energizing
the device for the rst time (display module only)

• choosing the display language,
• choosing the time zone,
• choosing whether daylight saving (summer time) is automatically taken into account or not,
• setting the date and time,
• choosing the unit system for all the measurements.
Quickstart is displayed.
→ Display
→  
the chosen language.
→  
→ On) or not (O)
for the display of the time.

→   
→   
→   
→   
→   
→  
→ Quickstart settings or 
English