Burkert FLOWave L - Activating the Compensation for a Liquid with a Linear Viscosity Compensation Curve

243
SAW sensor – Parameter
Type 8098 FLOWave L
15.15.3 Activating the compensation for a liquid with a linear viscosity
compensation curve
To activate the compensation for a liquid with a viscosity that changes in a linear way with the liquid tem-
perature, do the following:
→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ Viscositycompensation
→ Settings The current settings are displayed.
→ 
→ Linear
→ 
→  
2
/s), and in the sci-


→ 
→  
notation.
→ 
→ 
The compensation for a liquid with a linear compensation curve is active.

in the range covered by the equation, or if a wrong constant value has been entered), the compensated
Viscositycompensationfailed is displayed. If the message
is displayed, do the following:
→ 
→ 
English