Burkert FLOWave L - Disabling The Cut-Off Function Of The Mass Flow Rate; Resetting The Default Values Of All The Mass Flow Rate Parameters

172
SAW sensor – Parameter
Type 8098 FLOWave L
15.5.11 Disabling the cut-o function of the mass ow rate

→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ Stand.meas.values
→ Massow
→ Cut-o
→ Status
→ Disabled
→ 

15.5.12 Resetting the default values of all the mass ow rate
parameters

→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ Stand.meas.values
→ Massow
→ Resettodefault
→ 

→ 
English