Burkert FLOWave L - Configuring a Digital Output as an On;Off Output

293
Outputs – Parameter
Type 8098 FLOWave L
Parameter Default value DN of process connections
Pulses/volume
4000 pulses per volume unit 
2000 pulses per volume unit

DN08 ISO










DN40 DIN
DN40 ISO










30 pulses per volume unit
DN80 DIN
DN80 ISO
Inverted No all the diameters
18.5.1 Conguring a digital output as an on/o output

You can choose between the following events:
• Failure
• Functioncheck
• Outofspec.
• Maintenancereq.
• any event activated in the menu SAWsensor – Parameter – Diagnostics – Process
• any event activated in the menu SAWsensor – Parameter – Diagnostics – Electronic

→ Go to the CONFIGURATION view.
→ Outputs
→ Parameter view.
→ Output2:digital or Output3:digital
→ Mode
English