Burkert FLOWave L - Enabling the Cut-Off Function of the Mass Flow Rate

170
SAW sensor – Parameter
Type 8098 FLOWave L
→ Stand.meas.values
→ Massow
→ Limits
→ Resettodefault
→ 
The limit values and the hysteresis value are reset.
→ 
15.5.9 Enabling the cut-o function of the mass ow rate


• 
• 
t
0







 


→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ Massow
→ Cut-o
English