336
Maintenance and troubleshooting
Type 8098 FLOWave L
24.11.6 Message "Value totalizer1 too low"/ "Value totalizer2 too low"
or "Value mass totalizer1 too low"/ "Value mass totalizer2 too
low"
Message
or
Symboldisplayedinthe
informationbar
Possiblecause
minimum error value set in
warning limits and the hysteresis of each volume totalizer.
Whattodo? As soon as the value of the totalizer returns to within the
permitted range, the error is automatically reset.
Message
or
Symboldisplayedinthe
informationbar
Possiblecause The value of the totalizer
warning limits and the hysteresis of each volume totalizer.
Whattodo? As soon as the value of the totalizer returns to within the
permitted range, the warning is automatically reset.
24.11.7 Message "Fluid velocity too high"
Message
Fluid velocity too high
Symboldisplayedinthe
informationbar
Possiblecause
the hysteresis of the liquid velocity.
Whattodo? As soon as the value of the liquid velocity returns to within the permitted
range, the error is automatically reset.
Message Fluid velocity too high
Symboldisplayedinthe
informationbar
Possiblecause
limits and the hysteresis of the liquid velocity.
Whattodo? As soon as the value of the liquid velocity returns to within the permitted
range, the warning is automatically reset.
English
To Next Page
Loading...
