Burkert FLOWave L - Reading out the Number of Loaded Client (Module) Configurations; Reading out the Number of Managed Modules; Reading out the Number of Reconfigured Clients (Modules)

135
General settings – Diagnostics
Type 8098 FLOWave L
13.4.2 Reading out the number of loaded client (module)
congurations
The value is valid since the last device start-up.
Do the following:
→ Go to the CONFIGURATION view.
→ Generalsettings
→ Parameter view.
→ DIAGNOSTICS view.
→ Congurationprovider
→ Numberofloadedclientcongurations
→ 
13.4.3 Reading out the number of recongured clients (modules)
The value is valid since the last device start-up.
Do the following:
→ Go to the CONFIGURATION view.
→ Generalsettings
→ Parameter view.
→ DIAGNOSTICS view.
→ Congurationprovider
→ Numberofreconguredclients
→ 
13.4.4 Reading out the number of managed modules
The value is valid since the last device start-up.
Do the following:
→ Go to the CONFIGURATION view.
→ Generalsettings
→ Parameter view.
→ DIAGNOSTICS view.
English