Burkert FLOWave L - Replacing The Data Of The Configuration Memory; Transferring The Configuration Data Of All The Modules

122
General settings – Parameter
Type 8098 FLOWave L
12.12.2 Replacing the data of the conguration memory


→ Go to the CONFIGURATION view.
→ Generalsettings
→ Parameter view.
→ Congurationprovider
→ Eraseallclientcongurations
→ On
→ 
→ Restart the device.


The parameter Eraseallclientcongurations is automatically set to O.
12.12.3 Transferring the conguration data of all the modules
-

numbers.
Do the following:
→ Go to the CONFIGURATION view.
→ Generalsettings
→ Parameter view.
→ Congurationprovider
→ Forcerecongurationofallclients
→ On
→ 
→ Restart the device.

the device.
The parameter Forcerecongurationofallclients is automatically set to O.
English