223
SAW sensor – Parameter
Type 8098 FLOWave L
15.12.10 Setting the temperature compensation to measure the
dierentiation factor
All equations used in order to get liquid concentration values are using the default DF temperature
compensation. When changing the DF temperature compensation, you may alter the liquid concen-
tration measurement.
In order that the DF of the liquid stays constant whatever the liquid temperature, the DF must be temper-
ature compensated.
→
The device has 2 types of temperature compensations to measure the DF:
•
.
•
the temperature compensation for a liquid other than water.
that cannot be changed.
15.12.11 Setting the temperature compensation for a liquid other than
water
0
...a
) of the equation which compensates the temperature of the liquid to
calculate the DF:
a
0
2
T
2
3
T
3
4
T
4
T
→
0
to a
, contact Bürkert.
To activate the temperature compensation for a liquid other than water, do the following:
→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ Add.meas.values
→ DF
→ Compensation The current settings are displayed.
→
→ Manual
→
0
→
English
To Next Page
Loading...
