Burkert FLOWave L - Setting The Slope Value Of The Liquid Concentration

278
SAW sensor – Maintenance
Type 8098 FLOWave L
→ Calibration
→ Add.meas.values
→ Concentration1 or Concentration2
→ Oset
→ Teach-inbyreference The Currentsettings are displayed.
→ 
→   The Newsettings
are displayed.
→ 


simulation.
→ 
17.22 Setting the slope value of the liquid concentration

→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ MAINTENANCE view.
→ Calibration
→ Add.meas.values
→ Concentration1 or Concentration2
→ Slope
→ Entervalue
→  
→ 
The slope value of the selected liquid concentration is set.
English