Burkert FLOWave L - Message Undervoltage Detected; Message Voltage Is above the Warning Limit; Message Voltage Is below the Warning Limit

325
Maintenance and troubleshooting
Type 8098 FLOWave L
24.9.2 Message "Undervoltage detected"
Message
Undervoltage detected
Symboldisplayedinthe
informationbar
Possiblecause The supply voltage of the device is lower than or equal to the permitted

or the device temperature.
Whattodo?
→ 
As soon as the supply voltage value returns to within the permitted range,
the error is automatically reset.
24.9.3 Message "Voltage is above the warning limit"
Message 
Symboldisplayedinthe
informationbar
Possiblecause The supply voltage of the device is higher than or equal to the permitted

values.
Whattodo?
→ 
As soon as the supply voltage value returns to within the permitted range,
the warning is automatically reset.
24.9.4 Message "Voltage is below the warning limit"
Message 
Symboldisplayedinthe
informationbar
Possiblecause The supply voltage of the device is lower than or equal to the permitted

Changing the 2 warning limit values.
Whattodo?
→ 
→ .
As soon as the supply voltage value returns to within the permitted range,
the warning is automatically reset.
English