Burkert FLOWave L - Reading Out The Flow Direction That Has Been Set; Reading Out The Generated Events Related To The Device; Reading Out The Temperatures Of The Electronic Boards And Of The Liquid; Saw Sensor - Diagnostics

250
SAW sensor – Diagnostics
Type 8098 FLOWave L
16 SAW SENSOR – DIAGNOSTICS
16.1 Reading out the generated events related to the
device
To read out the generated events related to the monitoring of the process value limits and to the diagnostics
events, and to read out the possible associated behaviour of the device, do the following:
→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ DIAGNOSTICS view.
→ Device
→ Status
→ 
16.2 Reading out the ow direction that has been set
, do the
following:
→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ DIAGNOSTICS view.
→ Device
→ Flowdirection
→ 
16.3 Reading out the temperatures of the electronic
boards and of the liquid
To read out the measured temperatures of the electronic boards and of the liquid, do the following:
→ Go to the CONFIGURATION view.
→ SAWsensor
English