Burkert FLOWave L - Changing The Cut-Off Value Of The Volume Flow Rate; Disabling The Cut-Off Function Of The Volume Flow Rate

160
SAW sensor – Parameter
Type 8098 FLOWave L
15.4.10 Changing the cut-o value of the volume ow rate

depends on the DN of the measurement tube.

→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ Stand.meas.values
→ Volumeow
→ Cut-o
→ Value
→  
→ 

15.4.11 Disabling the cut-o function of the volume ow rate

→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ Stand.meas.values
→ Volumeow
→ Cut-o
→ Status
→ Disabled
→ 

English