Burkert FLOWave L - Choosing the Communication Protocol; Default Settings And Information On Configuration Files; Industrial Protocol Settings; Menu Parameter

306
Menu Parameter
Type 8098 FLOWave L
21 MENU PARAMETER
The Industrial communication parameters can be set with the Installer user level.

device.
21.1 Default settings and information on conguration les

country.burkert.com.
→ 
all the default settings of the device.
21.2 Industrial Protocol settings
21.2.1 Choosing the communication protocol
Do the following:
→ Go to the CONFIGURATION view.
→ Industrialcommunication
→ Parameter view.
→ Protocolsettings
→ Protocol
→ 
→ 
The gateway address is changed.
21.2.2 Reading out the MAC address of the device

 
menu),
 
 
English