Burkert FLOWave L - Message Temperature Is Below The Warning Limit; Message Temperature Is above the Warning Limit; Message Undertemperature Detected

327
Maintenance and troubleshooting
Type 8098 FLOWave L
24.9.8 Message "Undertemperature detected"
Message
Undertemperature detected
Symboldisplayedinthe
informationbar
Possiblecause The internal temperature of the device is lower than the permitted minimum
error value (
or the device temperature.
Whattodo?
→ 
As soon as the internal temperature value returns to within the permitted
range, the error is automatically reset.
24.9.9 Message "Temperature is above the warning limit"
Message Temperature is above the warning limit
Symboldisplayedinthe
informationbar
Possiblecause The internal temperature of the device is higher than the permitted

values.
Whattodo?
→ 

As soon as the internal temperature value returns to within the permitted
range, the error is automatically reset.
24.9.10 Message "Temperature is below the warning limit"
Message Temperature is below the warning limit
Symboldisplayedinthe
informationbar
Possiblecause The internal temperature of the device is lower than the permitted minimum
.
Whattodo?
→ 
minimum warning value.
As soon as the internal temperature value returns to within the permitted
range, the error is automatically reset.
English