22
Technical data
Type 8098 FLOWave L
6 TECHNICAL DATA
6.1 Operating conditions
Ambienttemperature Depends on the liquid temperature (see or )
• Device variant with two
• )
• See
• Device variant with two 4-pin
(Ethernet device variant)
• )
Airhumidity
Heightaboveseelevel
Operatingconditions Continuous operation
Equipmentmobility
Use Indoor and outdoor
▶ Protect the device against electromagnetic interference, ultraviolet rays
Installationcategory
Degreeofpollution Degree 2
Protectionclassaccordingto
IEC/EN60529
if the following conditions are observed:
• The device must be wired.
• The cable glands must be tightened.
• The covers must be screwed tight.
• Unused cable glands must be sealed with the blind plugs provided.
The blind plugs are mounted upon delivery of the device.
•
Protectionclassaccordingto
NEMA250
• The device must be wired.
• The cable glands must be tightened.
• The covers must be screwed tight.
• Unused cable glands must be sealed with the blind plugs provided.
The blind plugs are mounted upon delivery of the device.
•
→
supplement for the device. The supplement is available at country.burkert.com.
English
To Next Page
Loading...
