Burkert FLOWave L - Reading Out If A Process Value Is In The Monitored Range; Reading Out The Diagnostic Events Related To The Monitored Limits

254
SAW sensor – Diagnostics
Type 8098 FLOWave L
16.11 Reading out the diagnostic events related to the
monitored limits
To read out the diagnostics related to the monitored limits, do the following:
→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ DIAGNOSTICS view.
→ Limits
→ Status
→ 
16.12 Reading out if a process value is in the monitored
range
This menu point allows you to read out if a process-value is inside or outside its monitored limits. The moni-
,  and .
To read out if a process-value is inside or outside its monitored limits do the following:
→ Go to the CONFIGURATION view.
→ SAWsensor
→ Parameter view.
→ DIAGNOSTICS view.
→ Limits
→ Choose the process value
→ Status
→ 
English