30
Technical data
Type 8098 FLOWave L
Operating voltage •
the minimum voltage to be supplied depends on the
liquid temperature and on the ambient operating tem-
perature: depending on the device variant, see
or
•
• Filtered and regulated
•
• The device must be connected permanently to a Safety
•
Power consumption (without the consumption of the outputs)
•
•
•
(Ethernet device variant)
•
Polarity reversal Protected
as an analogue output
•
•
•
• Open loop detection through diagnostics software
function
• Any connection mode, in sink or source mode
• Galvanically isolated, passive
• Protected against polarity reversal
•
W
W
W
W
a digital output
• Transistor
• Any connection mode, in NPN or PNP mode
• Pulse (by default), can be changed by the user
•
•
• Galvanically isolated, passive
• Overload information through diagnostics software
function
• Protected against overloads
• Protected against polarity reversals
English
To Next Page
