6 System Information
24-30 WindO/I-NV4 User’s Manual
3 Check information about the system software and project data.
4 When you have finished checking the information, click OK.
5 Click Close.
This concludes checking system information.
• To check the optional fonts installed on the MICRO/I and the Kanji dictionary data, click Font/Kanji
Dictionary Data Information to display the Font Information dialog box. The Font Information dialog
box is displayed. For details, refer to “Font/Kanji Dictionary Data Information Dialog Box” on page 24-32.
• To check information about the external memory device inserted in the MICRO/I, click External Memory
Device Information to display the External Memory Device Information dialog box. For details, refer to
“External Memory Device Information Dialog Box” on page 24-33.
• To check information about the expansion modules attached to the MICRO/I, click Expansion Module
Information to display the Expansion Module Information dialog box. For details, refer to “External
Memory Device Information Dialog Box” on page 24-33.
• To check the communication driver set for the project that is downloaded to the MICRO/I, click
Communication Driver Information to display the Communication Driver Information dialog box. For
details, refer to “Communication Driver Information Dialog Box” on page 24-34.
To Next Page
Loading...
General