IMC CANSAS - Page 92

92 Operation
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
Type: The imc CANSAS-module's type, e.g. 6 * 2 differential input channels.
When using the on-line option for integrating a module, this setting is handled automatically and cannot
be changed.
In the off-line case, a selection must be made in the combo-box.
Serial number: The imc CANSAS-module's unique serial number, set at production.
When using the on-line option for integrating a module, this setting is handled automatically and cannot
be changed.
In the off-line case, any number from 1 to 999999999 can be freely selected. If you are making settings
for an actual module 'manually', however, the true serial number must be used.
Name: A unique name by which the imc CANSAS-module is designated in the database.
When using the on-line option for integrating a module, a default name, which is derived from the serial
number, is offered. However, if the serial number in question is already registered in the database, the
module name noted there is offered as the default.
Specifying and changing the name is permitted as long as the name is unique within the database.
Next: Completes the module-integration process. The data for the module are incorporated into the
database.
If the data do not conform to accepted limitations, an error message will appear and signal a return to
the previous dialog. Otherwise, the settings must be confirmed by pressing the softkey Finish. Once this is
done, the module is integrated and can be configured using the software.
If a imc CANSAS-module of the same type and serial number is already registered in the database, the
system asks whether the Baud rate, Master/Slave-ID and module ID numbers are to be updated, in other
words, to be overwritten: