Diagnostic information 2-15
7510
250.00
Paper jam
Sensor (registration) late jam
(feeding from the MPF)
The media is late reaching the sensor (registration)
within the specified time after the MPF pick solenoid
is turned on.
Go to “250.00 Sensor (registration) late jam
(feeding from the MPF)” on page 2-64.
280.00
Paper jam
Sensor (bridge unit media
entrance) late jam
The media is late reaching the sensor (bridge unit
media entrance) within the specified time after
reaching the sensor (fuser exit).
Refer to the Finisher Service Manual.
280.01
Paper jam
Sensor (bridge unit media
entrance) static jam
Media remains on the sensor (bridge unit media
entrance).
Refer to the Finisher Service Manual.
281.00
Paper jam
Sensor (bridge unit media
exit) late jam
The media is late reaching the sensor (bridge unit
media exit) within the specified time after reaching
the sensor (bridge unit media entrance).
Refer to the Finisher Service Manual.
281.03
Paper jam
Sensor (bridge unit media
exit) static jam
Media remains on the sensor (bridge unit media
exit).
Refer to the Finisher Service Manual.
281.04
Paper jam
Sensor (bridge unit exit bin)
late jam.
Sensor (bridge unit exit bin) is not turned on within
the specified time after the sensor (bridge unit
media entrance) is turned on.
Refer to the Finisher Service Manual.
281.05
Paper jam
Sensor (bridge unit exit bin)
lag jam.
Sensor (bridge unit exit bin) is not turned off within
the specified time after the sensor (bridge unit exit
bin) is turned on.
Refer to Finisher Service Manual.
281.06
Paper jam
Sensor (bridge unit exit bin)
static jam.
Paper remains on the sensor (bridge unit exit bin).
Refer to the Finisher Service Manual.
282.00
Paper jam
Sensor (finisher media
entrance) late jam
The media is late reaching the sensor (finisher
media entrance) within the specified time after
reaching the sensor (bridge unit media exit).
Refer to the Finisher Service Manual.
282.01
Paper jam
Sensor (finisher media
entrance) static jam
Paper remains on the sensor (finisher media
entrance).
Refer to the Finisher Service Manual.
283.00
Paper jam
Sensor (buffer path) late jam The media is late reaching the sensor (buffer path)
within the specified time after reaching the sensor
(finisher media entrance).
Refer to the Finisher Service Manual.
283.03
Paper jam
Sensor (buffer path) static
jam
Paper remains on the sensor (finisher buffer path).
Refer to the
Finisher Service Manual.
284.00
Paper jam
Sensor (lower media exit) late
jam
The media is late reaching the sensor (lower media
exit) within the specified time after reaching the
sensor (buffer path).
Refer to the Finisher Service Manual.
Error code or
message
Error contents Description/Action
To Next Page
Loading...
Need help?
General
