Lexmark X945e MFP 7510 series - Page 141

Diagnostic information 2-25
7510
Go Back
Previous
Next
847.01
Service fax
Fax storage The remaining memory available on the hard drive
is too small.
Go to “847.01 Fax storage error” on page 2-130.
848.00
Service modem
Fax modem/configuration ID
mismatch
The device does not have a modem installed, even
though its configuration ID indicates that a modem
should be present.
Go to “848.00 Fax/modem configuration ID
mismatch” on page 2-131.
849.00
Service hard
drive
Hard drive/configuration ID
mismatch
The device does not have a hard drive installed,
even though its configuration ID indicates that a
hard drive should be present.
Go to “849.00 Hard drive/configuration ID
mismatch” on page 2-131.
900.xx
Service RIP
software
System software error A system software error has occurred.
Go to “900.xx System software error” on
page 2-132.
901.xx
Service engine
error
RIP card assembly software
error
A error has occurred in the RIP card assembly
software.
Go to “901.XX RIP card assembly software error”
on page 2-134.
902.00
Service engine
error
General upper engine card
error
Fuse #1
An error has occurred in the upper engine card
assembly.
Go to “902.00 General upper engine error fuse
#1” on page 2-135.
902.01
Service engine
error
General upper engine card
error
Fuse #2
An error has occurred in the upper engine card
assembly.
Go to “902.01 General upper engine error fuse
#2” on page 2-136.
902.02
Service engine
error
General upper engine card
error
Fuse #3
An error has occurred in the upper engine card
assembly.
Go to “902.02 General upper engine error fuse
#3” on page 2-137.
902.03
Service engine
error
General lower engine card
error
Fuse #1
An error has occurred in the lower engine card
assembly.
Go to “902.03 General lower engine error fuse
#1” on page 2-138.
902.04
Service engine
error
General lower engine card
error
Fuse #2
An error has occurred in the lower engine card
assembly.
Go to “902.04 General lower engine error fuse
#2” on page 2-138.
902.05
Service engine
error
General lower engine card
error
Fuse #3
An error has occurred in the lower engine card
assembly.
Go to “902.05 General lower engine error fuse
#3” on page 2-139.
902.06
Service engine
error
General lower engine card
error
Fuse #4
An error has occurred in the lower engine card
assembly.
Go to “902.06 General lower engine error fuse
#4” on page 2-140.
Error code or
message
Error contents Description/Action