Lexmark X945e MFP 7510 series - Page 147

Diagnostic information 2-31
7510
Go Back
Previous
Next
941.00
Service tray 1
failure
Switch (media size) size
sensing error (tray 1)
The tray 1 switch (media size) detected an invalid
size setting.
Go to “941.00 Switch (media size) size sensing
error (tray 1)” on page 2-185.
941.01
Service tray 1
failure
sensor (media level) late
error (tray 1)
The sensing area of the sensor (media level) in the
media tray 1 is not interrupted within the specified
time after the lift tray has risen to operating level.
Go to “941.01 Sensor (media level) late error
(tray 1)” on page 2-186.
942.00
Service tray 2
failure
Switch (media size) size
sensing error (tray 2)
The tray 2 switch (media size) detected an invalid
size setting.
Go to “942.00 Switch (media size) size sensing
error (tray 2)” on page 2-187.
942.01
Service tray 2
failure
Sensor (media level) late
error (tray 2)
The sensing area of the sensor (media level) in the
media tray 2 is not interrupted within the specified
time after the lift tray has risen to operating level.
Go to “942.01 Sensor (media level) late error
(tray 2)” on page 2-188.
943.00
Service tray 3
failure
Switch (media size) size
sensing error (tray 3)
The tray 3 switch (media size) detected an invalid
size setting.
Go to “943.00 Switch (media size) size sensing
error (tray 3)” on page 2-189.
943.01
Service tray 3
failure
Sensor (media level) late
error (tray 3)
The sensing area of the sensor (media level) in the
media tray 3 is not interrupted within the specified
time after the lift tray has risen to operating level.
Go to “943.01 Sensor (media level) late error
(tray 3)” on page 2-190.
944.00
Service tray 4
failure
Switch (media size) size
sensing error (tray 4)
The tray 4 switch (media size) detected an invalid
size setting.
Go to “944.00 Switch (media size) size sensing
error (tray 4)” on page 2-191.
944.01
Service tray 4
failure
Sensor (media level) late
error (tray 4)
The sensing area of the sensor (media level) in the
media tray 4 is not interrupted within the specified
time after the lift tray has risen to operating level.
Go to “944.01 Sensor (media level) late error
(tray 4)” on page 2-192.
Error code or
message
Error contents Description/Action