NEC Xen Master Programming Manual

NEC Business Solutions Ltd Xen Master & Xen Axis
1 - 424
A6-324000-642-02 – Release 6.0 May 2003
Attendant Add-On
Console Transfer/
Camp-On Recall
Timer Selection
1-1-64 Specify the time for a ring transfer
from the DSS Console until the
recall alarm is sent.
30 sec. 1 min. 10 min.
First Delay
Announcement Start
Time Selection
1-1-71 Specify the time between receiving
an incoming CO call and sending
the First Delay Announcement to
the caller.
0 sec. 20 sec. 60 sec.
First to Second Delay
Announcement
Interval Time
Selection
1-1-73 Specify the time between the First
and Second Delay Announcement.
0 sec. 20 sec. No Limit
Second Delay
Announcement
Repeat Interval Time
Selection
1-1-75 Specify the time between repeated
Second Delay Announcement.
0 sec. 20 sec. No Limit
Delayed Ringing
Timer Assignment
(CO)
1-1-77 Specify the time for delayed ringing
on incoming outside line calls.
0 sec. 15 sec 99 sec.
ISDN DTMF Duration/
Interdigit Time
Selection
1-180 Specify tone duration and interdigit
time of Dual-Tome Multifrequency
(DTMF) signals for the ISDN
Trunk.
70/60 ms. 100/70 ms. 900/200 ms.
ISDN Dial Interval
Timer Selection*
1-1-81 Specify the dial interval timer for
ISDN lines when dialling from a
PHS
2 sec. 8 sec. 32 sec.
Internal Paging
Timeout Selection
1-2-00 Specify the time allowed for
paging.
90 sec. 90 sec. No Limit
Automatic Callback
Release Timer
Selection
1-2-02 Time duration before Automatic
Callback is automatically
cancelled.
30 sec. 30 min. 30 min.
Call Forward No
Answer Timer
Selection
1-2-22 Specify time before ICM or Trunk
calls are forwarded.
4 sec. 8 sec. 60 sec.
System Call Park
Recall Time Selection
1-2-23 Time before a parked call recalls to
the station that parked the call.
30 sec. 1 min 10 min.
Delayed Ringing
Timer Assignment
(ICM)
1-2-26 Specify the time for delayed ringing
on internal calls.
0 sec. 10 sec. 99 sec.
PS Out of Area Timer
Selection*
1-2-30 Assigns Out of Area PS Timer 00 sec. 12 sec. 99 sec.
Bounce Protect Time
Selection
1-3-01 Specify the time before a valid
hookflash is detected from a Single
Line Telephone or Voice Mail
System.
0 ms. 300 ms. 1500 ms.
Table 1-6 Function Timer Chart (Continued)
Timer
Memory
Block
Definition
Timing Value
Minimum Default Maximum
*Software Version 2.xx or higher

NEC Xen Master Specifications

General

Brand	NEC
Model	Xen Master
Category	Telephone
Language	English