May 2003
Programming Manual 1 - 433
A6-324000-642-02 – Release 6.0
May 2003
6.4.7 CO Feature Code Service For Code Restriction
(Memory Block 1-1-82)
This Memory Block assigns a set of feature codes per system. A station user
can dial these codes as the leading digits of a telephone number. The Xen
system ignores these digits and applies code restriction to the remaining
digits. The codes are sent to the CO as the leading digits on permitted code
restriction calls.
6.4.8 Trunk Digit Restriction Assignment
(Memory Block 4-32)
This Memory Block specifies, per station, the maximum number of digits that
can be dialled while on any outside line.
6.4.9 Code Restriction Class Assignment (Day Mode)
(Memory Block 4-07)
This Memory Block specifies, per station, the Code Restriction Class used
when the system or stations assigned tenant is in the Day Mode.
6.4.10 Code Restriction Class Assignment (Night Mode)
(Memory Block 4-08)
This Memory Block specifies, per station, the Code Restriction Class used
when the system or stations assigned tenant is in the Night Mode.
To Next Page
Loading...
Need help?
General
