Schweitzer Engineering Laboratories SEL-751 - Page 402

SET.30
of 78
SEL-751 Settings Sheets Date________________
Logic Settings (SET L Command) Slot D Output
SEL-751 Relay Instruction Manual Date Code 20170927
Slot D Output
Hidden if an output option is not included. The number of outputs depends on the I/O card option.
Slot E Output
Hidden if an output option is not included. The number of outputs depends on the I/O card option.
OUT401 FAIL-SAFE (Y, N) OUT401FS :=
OUT401 :=
OUT402 FAIL-SAFE (Y, N) OUT402FS :=
OUT402 :=
OUT403 FAIL-SAFE (Y, N) OUT403FS :=
OUT403 :=
OUT404 FAIL-SAFE (Y, N) OUT404FS :=
OUT404 :=
OUT405 FAIL-SAFE (Y, N) OUT405FS :=
OUT405 :=
OUT406 FAIL-SAFE (Y, N) OUT406FS :=
OUT406 :=
OUT407 FAIL-SAFE (Y, N) OUT407FS :=
OUT407 :=
OUT408 FAIL-SAFE (Y, N) OUT408FS :=
OUT408 :=
OUT501 FAIL-SAFE (Y, N) OUT501FS :=
OUT501 :=
OUT502 FAIL-SAFE (Y, N) OUT502FS :=
OUT502 :=
OUT503 FAIL-SAFE (Y, N) OUT503FS :=
OUT503 :=
OUT504 FAIL-SAFE (Y, N) OUT504FS :=
OUT504 :=
OUT505 FAIL-SAFE (Y, N) OUT505FS :=
OUT505 :=
OUT506 FAIL-SAFE (Y, N) OUT506FS :=
OUT506 :=