6/02
2-236
DC1632/2240
12-903
Prelaunch Training/Review
Status Indicator RAPs
12-903 Power On Compiler Entrance Sensor
The Compiler Entrance Sensor detected a paper at power on, when all the INTERLOCK were
closed, or at initialization.
Procedure
Check the following:
ï The Actuator for return failure
ï Enter dC330 [012-101] and press Start. Check only the signal wire of the sensor.
ï Check that the power voltage at the customer site does not drop.
Figure 1 Component Location
Figure 2 Compiler Entrance Sensor CD
Figure 3 Finisher PWB
Compiler
Entrance
Sensor
Decurler
Home
Sensor
To Next Page
Loading...
