Xerox DocuColor 1632 Service Manual

6/02
6-50
DC1632/2240
Prelaunch Training/Review
General Procedures and Information
770-061 Lpd Print Mode Type Auto - 1 = Auto, 16 = ART, 17 = PLW, 3 = HPGL2, 8 = ESCP, 5 = PostScript, 10 = TIFF, 23 = Dump (AP Version 1 =
Auto, 2 = PCL6, 5 = PostScript)
770-062 Lpd JCL Enable is Lpd PJL Enable for
AP
ON FALSE~TRUE 0 = OFF 1 = ON
770-063 TBCP Valid Flag None FALSE~TRUE 0 = None 1 = TBCP
770-064 Lpd Spool Mode Non
Spool
- 0 = Non Spool 1 = Spool
770-065 Lpd Time-out 16sec - 2~3600sec (Setup range = 2~65,535)
770-070 Lpd Address Limitation No - 1 = Yes 0 = No
770-071 lpd Valid IP Address 1 0.0.0.0 - 00000000~FFFFFFFF
770-072 lpd Valid IP Address 2 0.0.0.0 - 00000000~FFFFFFFF
770-073 lpd Valid IP Address 3 0.0.0.0 - 00000000~FFFFFFFF
770-074 lpd Valid IP Address 4 0.0.0.0 - 00000000~FFFFFFFF
770-075 lpd Valid IP Address 5 0.0.0.0 - 00000000~FFFFFFFF
770-080 SMB Port Enable Start Up 0~1 0 = Stop 1 = Start Up
770-081 SMB Print Mode Type Auto - 1 = Auto, 16 = ART, 17 = PLW, 3 = HPGL2, 8 = ESCP, 5 = PostScript, 10 = TIFF, 23 = Dump (AP Version 1 =
Auto, 2 = PCL6, 5 = PostScript)
770-082 SMB JCL Enable is SMB PJL Enable
for AP
ON FALSE~TRUE 0 = OFF 1 = ON
770-083 SMB TBCP Valid Flag None FALSE~TRUE 0 = None 1 = TBCP
770-084 SMB Spool Mode Non
Spool
- 0 = Non Spool 1 = Spool
770-085 SMB Transport Protocol both - 2 = TCP/IP, 4 = NetBeui, 6 = both
770-090 IPP Port Enable Stop 0~1 0 = Stop 1 = Start Up
770-091 IPP Print Mode Type Auto - 1 = Auto, 16 = ART, 17 = PLW, 3 = HPGL2, 8 = ESCP, 5 = PostScript, 10 = TIFF, 23 = Dump (AP Version 1 =
Auto, 2 = PCL6, 5 = PostScript)
770-092 IPP JCL Enable is IPP PJL Enable for
AP
ON FALSE~TRUE 0 = OFF 1 = ON
770-093 IPP TBCP Valid Flag None FALSE~TRUE 0 = None 1 = TBCP
770-094 Acl Authorization OFF
(none)
- 0 = OFF 1 = ON
770-095 Use DNS Name On FALSE~TRUE On, Off
770-097 Port no. 80 0~9999 0, 80, any one value between 8000~9999
770-098 IPP Spool Mode Non
Spool
- 0 = Non Spool 1 = Spool
770-099 Time Out 60 0~65535 0~65535 [Sec]
770-100 DHCP Mode DHCP - 0x10 = Manual, 4 = BOOTP, 2 = DHCP, 1 = RARP
770-101 IP Address 0.0.0.0 0x00000000~0xFF
FFFFFF
00000000~FFFFFFFF
770-102 Subnet Mask 0.0.0.0 0x00000000~0xFF
FFFFFF
00000000~FFFFFFFF
770-103 Gateway Address 0.0.0.0 0x00000000~0xFF
FFFFFF
00000000~FFFFFFFF
Table 18 Chain 770
Chain-Link Name Default Range Description

Xerox DocuColor 1632 Specifications

General

Brand	Xerox
Model	DocuColor 1632
Category	Printer
Language	English