Xerox PHASER 7500 - IBT Unit Near End Warning; IBT Unit End Warning

Phaser 7500 Printer Service Manual 3-307
Error Messages and Codes
IBT Unit Near End Warning/ IBT Unit End Warning
The IBT Belt Unit needs to be replaced soon.
The IBT Belt Unit must be replaced.
Applicable Chain-Link Codes
• 094-417: IBT Unit Near End Warning
• 094-420: IBT Unit End Warning
Initial Actions
• Power cycle the printer.
• If the problem persists, follow the procedure below.
1. Replace the IBT Belt Unit (REP 6.2, page 8-58).
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
■ IBT Belt Unit, PL6.1.10