Xerox PHASER 7500 Service Manual

6-8 Phaser 7500 Printer Service Manual
Adjustments and Calibrations
RegiCon Calibration
The RegiCon Calibration allows the users to adjust the RegiCon value.
Caution
The functions of the menus described here have great effect on the print
quality and operation of the machine. In addition, they include the
adjustment functions used at shipment, so do not change the settings unless
specified otherwise in this manual.
Procedure
1. Enter Service Diagnostics (page 4-9).
2. Scroll down the menu and select Adjustments/ Calibrations. Press OK.
3. Select RegiCon Calibration and press OK.
4. The printer starts processing with a Starting Calibration... message appears.
5. When the process is complete, the Calibration Results screen is displayed.
Note
There is no result display on the screen.

Xerox PHASER 7500 Specifications

General

Max Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	150, 000 pages
Standard Paper Capacity	550 sheets
Duplex Printing	Optional
Standard Memory	256 MB
Network Connectivity	10/100/1000Base-T Ethernet
Supported Operating Systems	Windows, Mac OS, Linux
Max Paper Capacity	2, 100 sheets
Connectivity	USB 2.0, Ethernet
PDL	PostScript 3, PCL 6, PDF
Print Speed	Up to 35 ppm