Xerox PHASER 7500 - REP 11.17 Rear Cover-STM

Phaser 7500 Printer Service Manual 8-127
Service Parts Disassembly
REP 11.17 Rear Cover-STM
PL11.7.2
1. Remove the Docking Screw that secures the Docking Bracket and remove the
Docking Bracket.
2. Remove 2 screws (silver, 8mm) that secure the Rear Cover-STM to the Tray
Module (1T).
3. Lift the Rear Cover to release the hook of the Rear Cover-STM and remove it
from the Tray Module (1T).
s7500-188