Xerox PHASER 7500 - First Print Output Time

Phaser 7500 Printer Service Manual 1-17
General Information
First Print Output Time
First Print Output Time (FPOT) is defined as the time from when the engine
receives a Start signal in Ready state, until a single page is printed and delivered to
the output tray.
The following conditions are applied:
• The Controller does not keep the print engine waiting.
• The printer prints at Simplex mode.
• The printer is at Standby mode (ROS Motor Off, Fuser Ready).
• Paper is A4 size Long-Edge Feed (LEF).
Condition FPOT (sec.)
FPOT from E-Star 30 sec.
Mono FPOT from Ready 12 sec.
Color FPOT from Ready 12 sec.
Intra-job Mono and Color Switch 4.4 sec.